Your Online Source For Fingerprint
Powder, Fingerprint Powder Black and Fingerprint Powder White.
We
have all your fingerprinting needs at unmatched prices! We not only carry
a full line of fingerprinting powders, fingerprinting brushes, fingerprinting
lifting tapes and backing cards for crime scenes. We also have all your
fingerprinting supplies for booking and background checks. From simple
ink pads and cards to the LE-10 inkless fingerprinting system, we have
it all! If you don’t see what you need, just call or fax us with your
fingerprinting needs and we’ll give you a price. And your PO’s are always
welcome, most all fingerprinting equipment ships within 24hr’s and we
can overnight your fingerprinting supplies.
Lightning® Bi-ChromaticTM magnetic powder has the remarkable properties of appearing black when dusted on a light-colored surface and appearing silver when dusted on a dark-colored surface. The greatest advantage of using Bi-ChromaticTM magnetic powder is that the lifted prints will be black when placed on a white backing card. This eliminates the bother of comparing latent prints with light-colored ridges on a black background against rolled prints with black ridges on a white background. It also means that only white latent print lift backing cards will be needed. There is no need for black latent print lift backing cards with Bi-ChromaticTM powder.
See
Tech Notes for
more information.
Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush."
When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.
Magnetic powder is recommended for use in dusting glossy papers (such as magazine covers), tissue paper, rough or polished wood, leather, plastics, glass, and rubber. It works exceptionally well on plastic baggies after they have been treated with glue fumes. White Magnetic Powder is suggested for use on dark surfaces where white contrast is desired. Our magnetic powders are packaged in wide-mouth jars (30 cc in 90 cc jars and 480 cc in 480 cc jars).
See
Tech Notes for
more information.
Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush."
When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.
Applied with a magnetic applicator, magnetic powder is recommended for use in dusting glossy papers (such as magazine covers), tissue paper, rough or polished wood, leather, plastics, glass, and rubber. It works exceptionally well on plastic baggies after they have been treated with glue fumes. Black magnetic powder is packaged in wide-mouth jars (30 cc in 90 cc jars and 480 cc in 480 cc jars).
See
Tech Notes for
more
Magnetic latent print powders are similar in appearance to standard powders, but they contain iron so that they will adhere to a magnet. When a magnetic powder applicator is dipped into the jar of magnetic powder, the powder gathers around the magnetic end of the applicator and it becomes a "brush."
When dusting is complete, hold the applicator over the jar, and a short pull on the top end will lift the magnet, allowing the powder to drop back into the jar. For this reason, very little powder is wasted. The new wide-mouth jar of magnetic powder will accept the large ball of powder held on the tip of the magnetic applicator.
Magnetic powder is recommended for use in dusting glossy papers (such as magazine covers), tissue paper, rough or polished wood, leather, plastics, glass, and rubber. It works exceptionally well on plastic baggies after they have been treated with glue fumes. Silver/gray powder is recommended for use on all glass, metallic, highly-varnished surfaces, hard rubber, safes, blue-steel guns or dark-colored surfaces. Many technicians prefer silver/gray powder due to its high sensitivity for developing latent prints on so many different surfaces. It is necessary to place a lift of a latent print developed with silver/gray powder on a black backing card. Silver/gray powder is available in wide-mouth jars (30 cc in 90 cc jars and 480 cc in 480 cc jars).
See
Tech Notes for
more information.
When should BlitzTM fluorescent magnetic powders be used? The choice is dependent on the surfaces which need to be dusted. Surfaces such as plastic bags or shiny magazine covers first should be fumed with Hard EvidenceTM pouches or Hard EvidenceTM Liquid Glue and then dusted with Blitzª fluorescent magnetic powder.
Other smooth surfaces, like vehicles and glass, can be fumed first and then dusted with RedwopTM fluorescent powder. If fuming is not practical, dusting with RedwopTM fluorescent powder alone may yield results with a forensic light.
Other smooth surfaces, like vehicles and glass, can be fumed first and then dusted with RedwopTM fluorescent powder. If fuming is not practical, dusting with RedwopTM fluorescent powder alone may yield results with a forensic light.
See
Tech Notes for
more information.
When should BlitzTM fluorescent magnetic powders be used? The choice is dependent on the surfaces which need to be dusted. Surfaces such as plastic bags or shiny magazine covers first should be fumed with Hard Evidenceª pouches or Hard EvidenceTM Liquid Glue and then dusted with BlitzTM fluorescent magnetic powder.
Other smooth surfaces, like vehicles and glass, can be fumed first and then dusted with RedwopTM fluorescent powder. If fuming is not practical, dusting with RedwopTM fluorescent powder alone may yield results with a forensic light.
Blitz-GreenTM magnetic fluorescent powder fluoresces well when viewed under the wavelengths listed below and with the lower nanometers also. It adheres well to most glossy papers and smooth plastic items. Blitz-GreenTM magnetic fluorescent powder is particularly sensitive to Ultraviolet wavelengths. Magnetic fluorescent powder fluoresces strongly when viewed under 450 nm, 485 nm, 525 nm, 530 nm and 570 nm wavelengths of light.
See
Tech Notes for
more information.
Lightning Gem Magnetic Black Ruby and Black Emerald Fluorescent Powder
GemTM powders are our newest magnetic fluorescent powders. Black RubyTM and Black EmeraldTM appear to be simple black magnetic powders. They are applied to evidence and can be lifted just as regular black magnetic powders are. However, these GemTM powders also fluoresce just as the RedwopTM and GreenwopTM powders do. You have the choice of using these GemTM powders as regular black magnetic powders, but you also have the option of fluorescing them.
Having the same wide rage of sensitivity as RedwopTM fluorescent powder, Black RubyTM is an excellent primary-use magnetic powder for examination of latent prints using portable lasers, Forensic Light Sources and ultraviolet light sources. Because of it's nature Black RubyTM Magnetic Powder is excellent as either a standard black dusting powder or a fluorescent latent print powder. It can be lifted just like any standard latent print powder, but when the surface is too rough to lift the print, simply use your Forensic Light Source or laser to flouresce the powder, and photograph it. Black RubyTM magnetic powder is very sensitive to 570-590 nm wavelength light when viewed through a red filter.
Similar to Black RubyTM, Black EmeraldTM Magnetic Powder can be lifted like any standard latent print powder, or used in conjunction with a Forensic Light Source, laser or ultraviolet light as a fluorescent latent print powder. Black EmeraldTM Magnetic Powder appears black when dusted on a surface, however, when illuminated, it fluoresces with the same intensity as GreenwopTM fluorescent powder. Black EmeraldTM Magnetic Powder is especially sensitive to long wavelength ultraviolet light, about 365 nm with no viewing filter necessary.
See
Tech Notes for
more information.
We
specialize in Police Equipment and Police Supply
2355 Westwood Blvd Suite 222
Los Angeles California 90064 USA
Telephone: (310) 475-7780 0r 1 800 264 8273
Fax Orders: (310) 475 8009
E mail : Sales@SecurityProUSA.com
