$214.99

Quantity Be the first to rate this product!

Regular Table-Top Outfit

This unit is designed to provide the proper height for rolling prints when it is placed on a desk or table. Built for years of use, convenient storage bins for all your printing supplies.

Contents:
1-stand with compartments, 21" L, 10 ¼" W, 10 ½" H
1-steel inking slab
1-4" Roller
1-PerfectPrint® Cleans up with water
1-cardholder
1-Retabs box of 500 tabs

$19.95

Choose Model 20035 - Steel Slab 20034 - Glass Slab Quantity Be the first to rate this product!

Fingerprint inking Slabs

Steel Slab

$39.99

Quantity Be the first to rate this product!

Fingerprint Ink Roller

Constructed specifically for use in taking rolled fingerprints, the frame is heavy-duty steel, and the handle is made of wood. The 4" roller is of medium-soft composition, ensuring an even distribution of ink. Using the ink roller, push and roll the ink over the slab until a smooth, thin layer of ink is formed. Then, begin rolling the fingers in the ink. Repeated cleaning with solvents will not damage this roller. Replacement rollers, including new end caps, are available.

$14.99

Quantity Be the first to rate this product!

Perfect Print in a Tube

Easy to Clean Fingerprinting Ink in a Tube

• SAVE...on material costs as no costly ink removers are needed
• NO WAIT...fingerprints instantly fixed on cards and smear-resistant
• EASY CLEANING...ink washes away with water
• ROLLS EASILY...on the slab, but is not slippery when rolling fingers
• OPTIMIZED...for AFIS capture
• NON-TOXIC...primary ingredient is used in cosmetic
• NO GOBBING...ink does not separate in the tube like common inks do
• PERFECT MIX...no thinner ever needed
• ENVIRONMENTALLY SAFER...no toxic ink removers needed

$25.95

Quantity Be the first to rate this product!

Retabs - 500 per box

Pressure-sensitive correcting labels for unacceptable prints. Usable for both ink methods and Digit 10 or IdentaPrint Inkless Fingerprint systems. Labels are on a continuous ream. Simply roll print on correcting label and affix to fingerprint card.

Instructions: Remove a strip of labels from easy dispensing box. Roll finger until an acceptable impression is obtained. Then apply to card over bad print. No time wasted fighting to remove protective backing.

These labels are intended for used with the LE-10 Digit 10 and LE-15 IdentaPrint systems.

$22.99

Quantity Be the first to rate this product!

PrePrint

PrePrint individual, disposable wipes improve finger surfaces for better fingerprint images. They eliminate excess moisture and soften dry callused fingers. Use prior to fingerprinting.

Capacity:100 individual coaters per box

$24.95

Quantity Be the first to rate this product!

Fingerprint Ink Remover Towelettes (100 pc)

Here is the fastest and easiest means to clean fingerprint ink from your hands. These towelettes are saturated with an ink remover solvent and are manufactured specifically for the purpose of cleaning fingerprint ink from the hands. They are handy to have in a portable kit or desk drawer. Use them on children for an easy, faster clean up. Each 5" x 8" fingerprint ink remover towelette is individually sealed in an airtight foil packet (2" x 2 1/4"). We offer a money-back guarantee if these towelettes dry out before opening.                                   100 bags per box

$17.99

Quantity Be the first to rate this product!

Slab and Roller Cleaner

This extra-quick drying slab and roller cleaner completely dissolves even the oldest, dried-on fingerprint ink from any glass or metal slab. It also works well on ink rollers to remove hard, dried ink from the roller and rod. For extreme heavy-use stations, cleaning should be done every day to prevent thick layers of ink from drying on the slab. It is recommended to clean the slab after rolling the prints of any person who is bleeding or has blood on his hands. This solvent is not recommended to clean hands. The products listed below are recommended for cleaning hands.

• This product cannot be shipped by air.